|
|
|
|
|
|
|
A two component chemical resin by injection available in coaxial cartridges of
400 ml - 300 ml - 150 ml.
It can be produced in polyester resin with or without stryrol
or
vinylester epoxy resin without stirol
We are able to market our product with personalized label
for all range we sell
|
|
|
|
|
|
| Chemical two-components vinylester epoxy resin without styrol special for wood available
in cartridges of 400 ml.
It is a chemical anchor studied for the fixing of all kind of wood.
It grant high performance resisting both to small movements, to damp conditions, and atmospheric agents, being able to fit itself with all wooden features.
Applications :
Carpentry : pergola, sheds, cartilever roof, glued laminated timber with connectors or threaded bars, wooden beam floors (pls see picture above).
|
|
| |
 |
| |
|
POWER GRIP WATER FIX is a special sintetic resin.
It can be employed for chemical fixing both in presence of water and in
case of very damp conditions.
It is a product really easy to use granting a high resistance even if in case
of difficult environments conditions.
It is available in two-component cartridges of 400 ml. and in tin plates of 5 kgs.
each.
|
|
| |
|
| |
|
POWER GRIP 5000, is the CASTABLE chemical anchor in polyester resin
to be used together with the activator (A+B)
It is available in tin plate of 5 kgs. packed in boxes of 4 tins each.
Employement:
It has been studied for the vertical floor applications, castable, directly in a hole
of minimum 16 mm. of diameter to anchor threaded ties, fixing surveyor's stake,
barriers, safety railing.
It is used for crack injection for reinforcement and repairing, screw and concrete
cracks.
The smoothness of product is personalized in respect to customer needs.
This product is really suitable for building and carpentry.
|
|
| |
|
| |
|
POWER GRIP 5001 , is the CASTABLE chemical anchor in vinylester epoxy resin
to be used together with the activator (A+B)
It is available in tin plate of 5 kgs. packed in boxes of 4 tins each.
Employement:
It has been studied for fixing and anchoring mechanical and metallic structural application
requiring high tensile features, strenght, and resistance to vibration and impact stress (rebar setting, artificial bumbers , silos, H-type steel column base, beams)
It has been studied for the vertical applications, castable, directly in a hole of minimum
16 mm. of diameter.
The smoothness of product is personalized in respect to customer needs.
This product is really suitable for building and heavy carpentry.
|
|
| |
|
|
| TPM
s.n.c. - Via F. De Pinedo 40/A - Verona Tel. 045.8103727 Fax 045.8197462
|
